Upcoming Webinars
Optimización de las compuertas de inyección para la mejora de la planicidad en superficies de sello
Tuesday, 5/9 - 11:00am CDT
En esta presentación hablaremos de la selección automática de las compuertas de inyección con uso de simulación para la optimización de la planicidad en las superficies de sello. Estaremos enfocados en piezas relacionadas con el mercado automotriz, pero cuyo método puede ser aplicado a cualquier pieza plástica de tengo estrictos requerimientos de calidad en relación a la planicidad.
Utilizing Simulation for Aggressive Quoting
Wednesday, 5/17 - 1:00pm CDT
In this presentation, we’ll evaluate how simulation software can be utilized, not just for issues on current parts/molds, but also up front to quote more accurately and aggressively. We’ll walk through the necessary results needed to quote a piece part correctly and showcase how, without simulation, you can either over-quote and lose out on potential business or under-quote and end up being awarded a job that could cause you to lose money.
On-Demand Webinars
Gate Locations Analyzed with Different Variations of Wall Thickness
We discuss how to avoid common issues when injecting parts that have non-uniform wall thicknesses. Using different geometries and various gate locations, we’ll analyze scenarios and see what defects can occur. Then we’ll go over different ways to mitigate these issues when simply designing a part with a uniform wall thickness isn’t feasible.
Evaluación de la sensibilidad de las dimensiones críticas con respecto a cambios en el proceso de manufactura
Sabes cómo afectan los cambios en los parámetros de proceso a las dimensiones críticas?
Gate Location & Filled Materials: The Effect on Shrinkage and Warpage
This webinar will teach you about glass-filled nylon and its effect on shrinkage and warpage. Ryan Furno will analyze results to help you locate the best gate location with minimal shrinkage and warpage. This will be an informative webinar for companies who manufacture 20-40% glass-filled materials.